The D4 QUAD Drone Bag is our second largest configured Drone Bag. It combines a CS4, a Pocket Cap Front, and the Pack Cap Rear. The Pack Cap rear allows the bag to be configured as a backpack for those times when you need to fly and be on the move at the same time.
NOTE: This price DOES NOT INCLUDE ANY FOAM. This bag is configured with no foam, so be sure to choose either a Drone Foam for the Mavic Pro, or the Mavic 2 Zoom/Pro, or the Mavic Air 2 to go along with the bag itself.
Optional items meant to work as part of this configuration.
The D4 QUAD Drone Bag consists of a CS4, inside which you will place either the Drone Foam for the (original) Mavic Pro, or the Drone Foam for the Mavic 2 Zoom/Pro, or the Drone Foam for the Mavic Air 2. Also, of course, you get the Pocket Cap Front to organize all the additional small stuff that goes with being a UAV Pilot. And finally the Pack Cap Rear is included, which allows you to choose whether you want the bag to be a backpack or not.
You'll get two Side Pocket Charlies, one for each side. These work great for holding spare props or even more batteries, etc.
The D4 QUAD Drone Bag also includes a Main Handle and a Shoulder Strap. (Most of the time, it's nice to keep the backpack straps stowed away and just use the Handle and the Shoulder Strap.)
Keep in mind that this bag, as it is presented here, is just a suggestion. It's a logical and useful starting point. You'll probably love it just the way we've configured it here for you. But you can change it and customize it to your heart's content. Just "Add To Cart", and then you'll see that there is a "Split Into Parts" button. The bag will be separated into all of it's component parts which you can then change as you see fit by adding and removing items within "The Builder". You can substitute a plain Flat Cap Rear instead of the Pack Cap Rear. Or you can choose different Side Pockets in place of the two "Charlies" that come by default. Or you can add a whole new Center Section for more space (or more drones). Truly a case of "Pick your Parts. Build your Bag."
Note that when you receive the CS4, it will by default include a "divider shelf". This part won't necessarily be useful with the drone foam installed and you can set this part aside. The "divider shelf" is used in the Flight Bag world for separating two headsets inside the CS4.
Interior of CS4: 13.5" tall, 10.0" wide, 4.0 inches deep. (35cm x 25cm x 10cm)
Exterior of entire bag: 14.0" tall, 13" wide, 8" deep. (36cm x 33cm x 20cm)
Keep in mind that the bag material is flexible, so the size of the interior storage may be able to "stretch" out just a bit in one direction or another. Also keep in mind that over-stuffing your bag can cause seam or material failure, and this is not covered by warranty.
4.4 lbs. (2 kg) - Bag only
0.4 lbs. (0.18 kg) - Drone Foam
Two. One side pocket mounting station on each side of the CS4.
Unlimited. You can add any of the other FLEX System modules to this bag, in any order, to make a bag as big or as small as you need on any given day. Make a bag that has more than one Drone module if you own multiple drones.
The top front pocket cover of the POCKET CAP FRONT module can be removed to make it easy to add custom embroidery. Just remove this pocket cover and hand it directly to your current embroidery provider. (We don't offer any embroidery service.)